Shop headings: New Spares | Used Spares | Accessories | Brands
Round CEV amber indicator lens
Mounts using two screws (not supplied). Also known as Guzzi ref. 39753771 and 14753750. See LIG19759 for Larghi lenses, they are not interchangeable with this CEV lens
More than 5 in stock
39753770-z 39753770 GU39753770 39 75 37 70
3975 3770 3975.3770 39.75.37.70
£7.00
INC VAT
£5.83 EX VAT
Marelli condenser with cable and mount bracket
2 required
More than 5 in stock
14715433 GU14715433 14 71 54 33
1471 5433 1471.5433 14.71.54.33
£10.50
INC VAT
£8.75 EX VAT
A2 stainless socket cap button head screw M6 x 10
Can be used in place of GU98210612
More than 5 in stock
98370612 GU98370612 98 37 06 12
9837 0612 9837.0612 98.37.06.12
£0.80
INC VAT
£0.67 EX VAT
Gasket for drive box sump
More than 5 in stock
12351601 GU12351601 12 35 16 01
1235 1601 1235.1601 12.35.16.01
£1.40
INC VAT
£1.17 EX VAT
Brembo caliper cover for models with obsolete twin bleed calipers
P9 caliper cover includes cutout each side for bleed nipple. Also known as Guzzi ref. 14654700, 17654760. Please note you may need to trim away the four moulded lugs at the bottom of the cover otherwise these may clash with your pad pins
More than 5 in stock
20325410 GU20325410 20 32 54 10
2032 5410 2032.5410 20.32.54.10
£11.00
INC VAT
£9.17 EX VAT
Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts
This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110
See BRA10310 for less expensive replica kit
More than 5 in stock
14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£29.00
INC VAT
£24.17 EX VAT
Complete (rev counter) tacho cable
We advise you to measure your existing cable before ordering in case you have a non standard set up.
More than 5 in stock
19768100-z 19768100 GU19768100 19 76 81 00
1976 8100 1976.8100 19.76.81.00
£12.50
INC VAT
£10.42 EX VAT
99cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir
Brake fluid, oil and fuel resistant. This is long enough for the rear brake master cylinder on V50 II and V35 I
More than 5 in stock
£12.00
INC VAT
£10.00 EX VAT
Swing arm taper roller bearing
2 races required per bike, supercedes unsealed bearing Guzzi ref. 92249217 and 92249216. See TRA90434 for oil seals
More than 5 in stock
92249213 GU92249213 92 24 92 13
9224 9213 9224.9213 92.24.92.13
£18.80
INC VAT
£15.67 EX VAT
Dellorto choke plunger return spring for models with Dellorto VHB 30, PHF 30 and PHF 36 carbs
More than 5 in stock
13937600 GU13937600 13 93 76 00
1393 7600 1393.7600 13.93.76.00
£1.70
INC VAT
£1.42 EX VAT